Browsing by Title
Now showing items 437-456 of 2257
-
Design and Implementation of a Cable Robot for Rehabilitation
(2022-12)Due to the precision and repeatability that current robotic system offer; many researchers and innovators have proposed solution for biomedical needs and applications. Classical robots can offer great precision and offer ... -
Design and Implementation of an Advanced Control and Guidance Algorithm of a Single Rotor Helicopter
(2013-06)In this thesis, a complete autopilot solution for the Joker 3 miniature helicopter was designed and implemented. A dynamic model, which sufficiently describes the Joker 3 helicopter in a wide range of flight conditions was ... -
Design and Optimization of a Planar Cable Robot
(2020-07)This thesis presents a new approach towards the design of Cable-Driven-Parallel Robots (CDPR). Typically, the design of such robots is not the main concern, whereas in this work, an optimization of the design is carried ... -
Design and Optimization of Fuel Cells: A Case Study on Polymer Electrolyte Membrane Fuel Cell Power Systems for Portable Applications
(Wiley, 2022)Fuel cells are energy conversion devices that directly convert chemical energy of fuels such as hydrogen to useful work with negligible environmental impact and high efficiency. This study deals with thermodynamic analysis ... -
Design and Performance Analysis of Misalignment Tolerant Charging Coils for Wireless Electric Vehicle Charging Systems
(MDPI, 2021)n order to design a high efficiency Wireless Electric Vehicle Charging (WEVC) system, the design of the different system components needs to be optimized, particularly the design of a high-coupling, misalignment-tolerant ... -
Design and performance of sustainable/green concrete
(2016-01)Concrete is the most used construction material in the world. However, the production of one ton of cement, which is the main ingredient of concrete, releases about one ton of carbon dioxide, and consumes natural resources, ... -
Design and simulation of a UOIT copper-chlorine cycle for hydrogen production
(Wiley, 2013-08)A design and simulation study of the four-step copper–chlorine (Cu–Cl) cycle using Aspen Plus software (Aspen Technology Inc., Cambridge, MA)is reported. The simulation consists of four main sections: hydrolysis, ... -
Design and simulation of a UOIT copper–chlorine cycle for hydrogen production
(Wiley, 2012)A design and simulation study of the four-step copper–chlorine (Cu–Cl) cycle using Aspen Plus software (Aspen Technology Inc., Cambridge, MA)is reported. The simulation consists of four main sections: hydrolysis, ... -
Design and Testing of LCC-Compensated Dynamic Wireless Electric Vehicle Charging System
(2022-04)Electric vehicles (EV) are witnessing a growth in the vehicle’s markets. One main reason to this growth is that they serve as a new form of clean transportation. This increasing number needs a sufficient number of charging ... -
Design and Utilization of a Direct Methanol Fuel Cell
(MDPI, 2022)This study introduces a step-by-step, summarized overview of direct methanol fuel cell (DMFC) fundamentals, thermodynamic–electrochemical principles, and system evaluation factors. In addition, a parametric investigation ... -
Design of a Fully Concentrated Solar Powered Electricity Generation Plant for the UAE
(2018-09)The increase in the world’s demand for electricity and the depletion of the fossil fuels used in conventional power plant systems raises the need for different renewable sources of electricity generation. Concentrated solar ... -
Design of a High Power, LCC-Compensated, Dynamic, Wireless Electric Vehicle Charging System with Improved Misalignment Tolerance
(MDPI, 2021)Dynamic wireless power transfer (DWPT) systems are becoming increasingly important for on-the-move electric vehicle (EV) charging solutions, to overcome range anxiety and compensate for the consumed energy while the EV is ... -
Design of a Power Amplification System for S-Band Satellite Applications
(2021-07)The satellite industry is in more demand than ever for more efficient satellites as they are getting smaller, and with it, the on-board power resources are also getting more limited. The high-power amplification section ... -
Design of a Pseudo-Real Time Microwave Imaging System for Cylindrical Dielectric Structures
(2011-05)In this thesis, the design and implementation of a pseudo-real time Microwave imaging system for cylindrical dielectric structures is investigated. Two different prototypes that have the same frequency of operation (7.5 ... -
Design of Airfoils for Wind Turbine Rotors
(2014-07-22)The turbine is a machine which converts rotational energy into usable work or usable energy. This change is initiated through mechanical gearing or because of electromagnetic induction, which results in electricity. There ... -
Design of Precision RSSI Circuit for Wireless Power Transfer Receivers
(2023-01)Tracking systems for wireless power transfer (WPT) systems are becoming a necessity. WPT is a modern way of wirelessly charging devices using RF beams. The target signals are sometimes too weak to be received, which is why ...