Search
Now showing items 1-9 of 9
Lateral Earth Pressure on Non-Yielding Walls Supporting Over-Consolidated Sand
(2013-07)
The most important problem associated with retaining wall structures is the additional compaction-induced lateral earth pressure. Currently, none of the available design methods used to calculate the lateral earth force ...
Modeling Smartphone Power
(2013-06)
Battery technology has not advanced rapidly enough to keep pace with the growing energy demands of today's portable electronics. Leading this critical need for energy are smartphone devices which are being deployed and ...
Modeling of Tool Wear when Turning of TI-6AL-4V Titanium Alloy
(2013-02)
Difficult-to-cut materials are widely used particularly in the aerospace and automotive industries. However, the high cost of processing these materials limits the use of their improved mechanical properties. Tool life is ...
Optimization of Commercially Off the Shelf (COTS) Electric Propulsion System for Low Speed Fuel Cell UAV
(2013-03)
Fuel cell technology offers higher energy density than any other onboard electric power source. However, despite its high energy content per unit mass, the fuel cell is lacking in power density ratio compared to Lithium-Polymer ...
Integrated Renewable Energy Options for HVAC-Cooling Systems
(2013-06)
The demand for energy is increasing at an unexpected rate all over the world. Most of the present worldwide energy usage is based on fossil fuel and results in continuous depletion of this resource. Conventional Heating ...
Technology Management and Analysis of Integrating Fuel Cell Systems in Gas Turbine Power Plants
(2013-04)
In this thesis, comprehensive and detailed energy and economic analyses of integrating different types of fuel cells in gas turbine power plants are performed. The research investigates the performance of a hybrid system ...
Artificial Intelligence-Based Modeling of the Nonlinear Behavior of Buckling-Restrained Braces
(2013-03)
The present research attempts to investigate and compare various artificial intelligence techniques to model the dynamic nonlinear behavior of Buckling Restrained Braces (BRBs). The various intelligent models are developed ...
Design of Robust Controllers for a Rotary Wing Helicopter
(2013-06)
Due to inherent instability, parametric variations, changing properties during flight, and uncertainties in predicting aerodynamic coefficients, helicopter flight control requires strategies with enough robustness to cope ...
Ground Penetrating Radar Technique for Bridge Deck Inspection
(2013-07)
The rapid growth of infrastructure in the UAE has caused a proportional growth in the transportation system. Bridges are among the major elements in the transportation system that requires continuous monitoring and maintenance ...