Search
Now showing items 1-10 of 41
Portable Flood Relief Unit: Using Nanoiltraion and Hydroelectricity Generaion
(2016-11)
Bangladesh is a flooding hotspot as 80% of Bangladesh is considered to be floodplain. It also has an extensive sea coastline, putting the nation at a high risk of experiencing periodic widespread damage. On average, in ...
Converting Low Level Nuclear Waste to Fuel
(2016-11)
In modern times, the use of nuclear energy has increased due to the depletion of petroleum and fossil fuels. However, the nuclear power plants produce hazardous nuclear waste that adversely affects the environment.These ...
Waste Management in the UAE
(2016-11)
Municipal waste is a rapidly growing issue in developing and developed countries. A technology known as Waste to Energy (WTE) Technology is introduced to reduce the amount of municipal waste. Incineration is the combustion ...
Wireless Power Transfer to Mobile Devices
(2016-11)
A device that transmits power to other mobile devices within a wave range limit by using an inductive coil that creates a magnetic field which is received by the device’s inductor coil .Two range limits will be performed ...
Does the Answer to Water Security in the UAE Lie in Pakistan?
(2016-11)
Is importing water into the UAE a practical solution from technological, political and environmental perspectives?
Developing an Integrated Water Management Infrastructure in Homes
(2016-11)
As the world population is predicted to increase (see figure 1), the human consumption to sources of life; such as food and water, will increase. However; the freshwater withdrawals have tripled over the last 50 years and ...
Smart Fire Extinguishing System (SFES)
(2016-11)
Most buildings in UAE are complying with the safety standards related to fire accidents to ensure safe accommodation for the residents. Hence, most buildings use water-based sprinkler system for fire extinguishing, as shown ...
3D Printers for Sustainable Construction
(2016-11)
How can 3D printing contribute to the sustainability of building construction?
3D Printing of Buildings on Construction Sites
(2016-11)
3D printing is a new technology that is still under development. 3D printing enables industry to construct buildings and structures quickly and efficiently at low cost. Cost reduction results from reduced expenditure on ...
Feasibility of 3D Depth Camera in the Civil Engineering Field
(2016-11)
In the civil engineering field, land surveying is the foundation of any construction process and has always been the method of choice for topographic mapping analysis. One of the latest technologies of 3D Depth Camera is ...