Browsing Masters Theses by Series "Master of Science in Civil Engineering (MSCE)"
Now showing items 1-20 of 154
-
2D Elasto-Plastic Finite Element Analysis of Tunnels in Dubai, UAE
(2012-06)Major cities in UAE in general and Dubai in particular are facing significant challenges in terms of traffic flow patterns. Tunnels are being considered as viable option to alleviate the problems faced by transportation ... -
Analysis and Design of Circular Shafts Using Finite Element Method
(2015-02)Rapid expansion of urban areas has created a need to expand/rehabilitate the existing buried infrastructure at the same or a greater rate. Technical challenges such as variable soil and rock profiles, high groundwater ... -
Analysis of Non-Yielding Basement Wall Adjacent to Strip Footing
(2016-05)Foundation depth below the ground surface is one of the major factors that contributes to the bearing capacity and settlement of shallow foundation. Hence, it is common to find adjacent buildings on shallow foundations ... -
Analyzing hydrodynamic changes in the Dubai Creek: a pre- and post-extension study
(2023-11)This thesis presents a comparative study that examines the effects of the Dubai Creek extension on its hydrodynamics and water flushing dynamics. Dubai Creek (Khor Dubai) is a 24km artificial seawater stream located in the ... -
Assessment of Disinfection By-Product Formation in Polymeric Pipe Distribution Systems
(2013-06)In recent years, polymeric materials have become the dominant type of material used for drinking water pipe distribution systems. They have some advantages over other types of pipes such as cast iron, ductile iron, concrete, ... -
Behavior of Concrete Filled Steel Tube (CFST) Under Different Loading Conditions
(2012-06)Concrete Filled Steel Tubes (CFSTs) were used in construction in the early 1900's. However, the research into CFSTs did not begin until the 1960s. From that time onwards, several studies were conducted on the CFSTs to fully ... -
Behavior of FRP-RC Columns Using BFRP Ties under Concentric Loading
(2019-12)Several studies have investigated the use of Fiber-Reinforced Polymers (FRP) rebars in reinforced concrete (RC) flexural members. However, not enough depth of understanding is currently available with regards to their use ... -
Behavior of RC Beams Strengthened with CFRP Laminates Under Fire - A Finite Element Simulation
(2011-03)For the last two decades, the use of Fibre Reinforced Polymers (FRP) material has been successfully employed in many civil engineering applications. FRP strengthening systems are mainly used to retrofit existing and deficient ... -
Behaviour of Shear Deficient Reinforced Concrete Beams with Externally Bonded Aluminum Plates
(2012-06)Enhancing the shear capacity of reinforced concrete (RC) beams was done using many different ways and materials. Steel and Fiber reinforced polymers are the most common materials used to strengthen RC beams in shear. ... -
BIM for Energy Modelling of Green Buildings
(2018-11)Energy conservation has become a priority for many governments and sustainable building standards such as LEEDS and Estidama. This is largely due to the high energy demand of buildings and the rising concerns over the ... -
Bond Stress-Slip Models and Behavior of Aluminum Alloys-Concrete Interface
(2017-01)In the last few decades, different techniques have been used for strengthening reinforced concrete (RC) structures to increase their strength and stiffness. One of these techniques involves the use of steel and fiber ... -
Bridge Deck Inspection Utilizing Infrared Thermal Imaging Technique
(2014-01)Infrared Thermography (IRT) is a promising Non-destructive Evaluation (NDE) technique that has been widely used in bridge deck inspection. It is a quick and easy alternative to provide preliminary information of possible ... -
Bridge Structural Health Monitoring Using Mobile Sensor Networks
(2022-12)Vehicles moving along a bridge will dynamically interact with the bridge's vibrations. An acceleration sensor on the vehicle can record these vibrations’ signals resulting from different sources of interaction, namely, the ... -
Buckling of Pretwisted Steel Columns
(2015-01)Buckling is a mode of failure that is mainly observed in compression members due to structural instability. Inducing a natural pretwist along the length of a column section makes the column have a different resistance at ... -
Characterization and Modeling of Damage in Steel at Different Strain Rates
(2011-01)The structural behavior of steel, as many structural materials, changes during deformation processes under complex mechanical loadings. The damage process may start at some point in the deformation process in the form of ... -
Comparative Evaluation of Activated Carbon and Granulated Blast Furnace Slag in Treating Greywater
(2020-05)Recycling greywater (GW) for on-site, non-potable application can reduce the load to wastewater treatment plants and stress on potable water demand for domestic water supply. However, utilization of GW requires careful ...