Browsing by Title
Now showing items 432-451 of 2253
-
Design and Assessment of an Innovative Thermal Management System for Electronic Cooling Using PCMs
(2020-07)Thermal management of electronics is an important issue since the reliability of electronic components is greatly affected by the operating temperature. Electronics, such as laptops, are becoming more likely to overheat ... -
Design and Characterization of Flexible and Implantable Electrodes
(2019-04)Implantable bioelectrodes have the potential to advance neural sensing and muscle stimulation, especially in cases of peripheral nerve injuries. In such cases, the application of electrical stimulation to the muscles ... -
Design and Comparison Analysis of Various Flow Configurations in Bipolar Plates via Numerical Simulation
(Canadian Center of Science and Education, 2021)Bipolar plates play a major role in the overall performance of fuel cells, hence their proper design and optimization are essential. In this regard, pressure drop across bipolar plates has a major impact on the efficiency. ... -
Design and Construction of a Cross-Laminated Timber Skyscraper
(2016-11)Concrete and steel are currently the building materials in most skyscraper construction. Due to their negative impact on the environment, timber has been proposed as an alternative material. -
Design and Development of a Synergetic Controller for a Permanent Magnet Synchronous Motor Drive System
(2017-12)Electric vehicles are gaining increasing attention by automotive manufacturers in an attempt to reduce carbon footprint and produce more eco-friendly vehicles. Electric vehicles are powered by electric motor drives instead ... -
Design and Implementation of a Cable Robot for Rehabilitation
(2022-12)Due to the precision and repeatability that current robotic system offer; many researchers and innovators have proposed solution for biomedical needs and applications. Classical robots can offer great precision and offer ... -
Design and Implementation of an Advanced Control and Guidance Algorithm of a Single Rotor Helicopter
(2013-06)In this thesis, a complete autopilot solution for the Joker 3 miniature helicopter was designed and implemented. A dynamic model, which sufficiently describes the Joker 3 helicopter in a wide range of flight conditions was ... -
Design and Optimization of a Planar Cable Robot
(2020-07)This thesis presents a new approach towards the design of Cable-Driven-Parallel Robots (CDPR). Typically, the design of such robots is not the main concern, whereas in this work, an optimization of the design is carried ... -
Design and Optimization of Fuel Cells: A Case Study on Polymer Electrolyte Membrane Fuel Cell Power Systems for Portable Applications
(Wiley, 2022)Fuel cells are energy conversion devices that directly convert chemical energy of fuels such as hydrogen to useful work with negligible environmental impact and high efficiency. This study deals with thermodynamic analysis ... -
Design and Performance Analysis of Misalignment Tolerant Charging Coils for Wireless Electric Vehicle Charging Systems
(MDPI, 2021)n order to design a high efficiency Wireless Electric Vehicle Charging (WEVC) system, the design of the different system components needs to be optimized, particularly the design of a high-coupling, misalignment-tolerant ... -
Design and performance of sustainable/green concrete
(2016-01)Concrete is the most used construction material in the world. However, the production of one ton of cement, which is the main ingredient of concrete, releases about one ton of carbon dioxide, and consumes natural resources, ... -
Design and simulation of a UOIT copper-chlorine cycle for hydrogen production
(Wiley, 2013-08)A design and simulation study of the four-step copper–chlorine (Cu–Cl) cycle using Aspen Plus software (Aspen Technology Inc., Cambridge, MA)is reported. The simulation consists of four main sections: hydrolysis, ... -
Design and simulation of a UOIT copper–chlorine cycle for hydrogen production
(Wiley, 2012)A design and simulation study of the four-step copper–chlorine (Cu–Cl) cycle using Aspen Plus software (Aspen Technology Inc., Cambridge, MA)is reported. The simulation consists of four main sections: hydrolysis, ... -
Design and Utilization of a Direct Methanol Fuel Cell
(MDPI, 2022)This study introduces a step-by-step, summarized overview of direct methanol fuel cell (DMFC) fundamentals, thermodynamic–electrochemical principles, and system evaluation factors. In addition, a parametric investigation ... -
Design of a Fully Concentrated Solar Powered Electricity Generation Plant for the UAE
(2018-09)The increase in the world’s demand for electricity and the depletion of the fossil fuels used in conventional power plant systems raises the need for different renewable sources of electricity generation. Concentrated solar ... -
Design of a High Power, LCC-Compensated, Dynamic, Wireless Electric Vehicle Charging System with Improved Misalignment Tolerance
(MDPI, 2021)Dynamic wireless power transfer (DWPT) systems are becoming increasingly important for on-the-move electric vehicle (EV) charging solutions, to overcome range anxiety and compensate for the consumed energy while the EV is ...