Browsing by Title
Now showing items 356-375 of 2257
-
Corrections to Yukawa couplings from higher dimensional operators in a natural SUSY SO(10) and HL-LHC implications
(Springer, 2021-01-11)We consider a class of unified models based on the gauge group SO(10) which with appropriate choice of Higgs representations generate in a natural way a pair of light Higgs doublets needed to accomplish electroweak symmetry ... -
Corrosion Behavior of Common Metals in Eutectic Ionic Liquids
(International Journal of ELECTROCHEMICAL SCIENCE, 2019)The corrosion behavior of six choline chloride-based eutectic solvents namely, ChCl-Ur, ChCl-EG, ChCl-Gl, ChCl-MA, ChCl-Ph and ChCl-TG towards copper, mild steel and stainless steel 316 have been investigated. The effect ... -
Corrosion Inhibition of Mild Steel in 2M HCl Using Aqueous Extract of Eggplant Peel
(ResearchGate, 2011)The objective of this study was to investigate the inhibitive action of eggplant peel extract toward the corrosion of mild steel in 2M HCl solution by employing weight loss measurements and electrochemical techniques. The ... -
Corrosion Inhibition of Mild Steel using Fig Leaves Extract in Hydrochloric Acid Solution
(ResearchGate, 2011)The inhibition effect of Fig leaves extract on corrosion of mild steel in 2M acid solution was investigated using traditional weight loss measurements and various electrochemical techniques. Corrosion inhibition efficiency ... -
Corrosion Inhibition of Mild Steel using Potato Peel Extract in 2M HCl Solution
(ResearchGate, 2011)The inhibitive effect of naturally available potato peel extract (PPE) toward the corrosion of mild steel in 2M HCl solution has been investigated by weight loss and electrochemical techniques. The results showed increase ... -
Corruption, lending and bank performance
(American University of Sharjah, 2019-11-03)This paper uses a sample of 7235 banks from 160 countries between 2000 and 2016 to investigate the link between corruption, lending and bank performance. It considers both country- and bank-level corruption. The study finds ... -
Cortical EEG Source Localization of Focal Epilepsy
(2017-11)Brain source localization allows us to localize different brain regions that are activated during neural activity. Several imaging modalities can be used for recording neural activity and are essential in clinical applications. ... -
Cost and Sustainability Optimization of Desalinated Water Supply Chains
(2023-11)The increasing demand for freshwater along with the diminishing conventional water resources are the major reasons why the demand for desalinated water has been escalating. Given that the desalinated Water Supply Chain ... -
Cost Evaluation of 3D Concrete Printing in the UAE Construction Industry
(2023-11)The integration of 3D Concrete Printing (3DCP) in the construction sector is rapidly expanding, poised to revolutionize conventional processes and usher in disruptive technologies. Globally, the construction industry is ... -
The cost of integration of parabolic trough CSP plants in isolated Mediterranean power systems
(2010-06)In this work, a technical and economic analysis concerning the integration of parabolic trough concentrated solar power (CSP) technologies, with or without thermal storage capability, in an existing typical small isolated ... -
Cost-benefit analysis for the installation of cogeneration CSP technology in Cyprus
(2013-12)The purpose of this work is to investigate whether the installation of an innovative cogeneration of electricity and desalinated water (DSW) with concentrated solar power (CSP) technology in Cyprus is economically feasible. ... -
The costs of power outages: A case study for Cyprus
(Elsevier, 2012-10)We study the costs of electricity disruptions in Cyprus, which suffered severe power shortages in summer 2011 after an explosion that destroyed 60% of its power generating capacity. We employ both economic and engineering ... -
Coupling of an Electrolyzer with Rankine Cycle for Sustainable Hydrogen Production via Thermal Solar Energy
(2015-05)Due to the global challenges faced everyday by our planet earth, several groundbreaking energy solutions are needed to reduce the environmental pollution caused by fossil fuels and improve energy sustainability for the ... -
Coupling of copper-chloride hybrid thermochemical water splitting cycle with a desalination plant for hydrogen production from nuclear energy
(2010-02)Energy and environmental concerns have motivated research on clean energy resources. Nuclear energy has the potential to provide a significant share of energy supply without contributing to environmental emissions and ... -
Court Interpreting in the Sultanate of Oman
(2007-06)In this dissertation, the situation of court interpreting in Oman is discussed and the challenges that face court interpreters are further investigated. This thesis touches upon significant issues about court interpreting ... -
Creating Observational 3D Sculptures
(International Symposium on Electronic Art, 2015)Technology has been used to assist in communication and concept development by artists, designers/inventors, engineers, clients, manufacturers and others. [1-3] The use of technology to aid artists capture what they see ... -
Criteria Development for Affordable Housing in the United Arab Emirates (UAE)
(2022-05)It is intuitive to believe that having a decent living habitat is the birth right of every human being. Nevertheless, many people face the global problem of securing decent affordable housing. The concept of affordability ... -
Critical research needs for identifying future changes in Gulf coral reef ecosystems
(2013-07)Expert opinion was assessed to identify current knowledge gaps in determining future changes in Arabian/Persian Gulf (thereafter ‘Gulf’) coral reefs. Thirty-one participants submitted 71 research questions that were ... -
Critical resolved shear stress for slip and twin nucleation in single crystalline FeNiCoCrMn high entropy alloy
(Elsevier, 2017)High entropy alloys is an emerging class of materials with superior mechanical properties down to cryogenic temperatures. At 77K, and unlike traditional metallic alloys, an increase in strength, strain hardening rate, and ... -
Critical Review of the Evolution of Project Delivery Methods in the Construction Industry
(MDPI, 2021)Selecting the appropriate project delivery method (PDM) is a very significant managerial decision that impacts the success of construction projects. This paper provides a critical review of related literature on the evolution ...