Search
Now showing items 1-10 of 11
Shear Strength of Fiber Reinforced Recycled Aggregate Concrete
(MDPI, 2020)
In this paper, shear strength of fiber reinforced recycled concrete was investigated. A Self Consolidated Concrete (SCC) matrix with 100% coarse recycled aggregate and different types of fibers were used in the study. Steel ...
Environmental Analysis of Sustainable and Traditional Cooling and Lubrication Strategies during Machining Processes
(MDPI, 2020)
Due to rising demands of replacing traditional cooling strategies with sustainable cooling strategies, the development of sustainable strategies such as minimum quantity lubrication (MQL) of nano-cutting fluids (NCFs) is ...
Modeling of fiber bridging in fluid flow for well stimulation applications
(Springer, 2020)
Accurate acid placement constitutes a major concern in matrix stimulation because the acid tends to penetrate the zones of least resistance while leaving the low-permeability regions of the formation untreated. Degradable ...
A Micromorphic Beam Theory for Beams with Elongated Microstructures
(Nature, 2020)
A novel micromorphic beam theory that considers the exact shape and size of the beam’s microstructure is developed. The new theory complements the beam theories that are based on the classical mechanics by modeling the ...
Optimization of a Confined Jet Geometry to Improve Film Cooling Performance Using Response Surface Methodology (RSM)
(MDPI, 2020)
This study investigates the interrelated parameters affecting heat transfer from a hot gas flowing on a flat plate while cool air is injected adjacent to the flat plate. The cool air forms an air blanket that shield the ...
Low-Cost Reduced Navigation System for Mobile Robot in Indoor/Outdoor Environments
(IEEE Access, 2020)
This paper presents a low-cost based approach for solving the navigation problem of wheeled mobile robots to perform required tasks within indoor and outdoor environments. The presented solution is based on probabilistic ...
Optimization of a Confined Jet Geometry to Improve Film Cooling Performance Using Response Surface Methodology (RSM)
(MDPI, 2020)
This study investigates the interrelated parameters affecting heat transfer from a hot gas flowing on a flat plate while cool air is injected adjacent to the flat plate. The cool air forms an air blanket that shield the ...
Optimization of Cutting Process Parameters in Inclined Drilling of Inconel 718 Using Finite Element Method and Taguchi Analysis
(MDPI, 2020)
Nickel-based superalloys are famous in the demanding applications. Inconel 718 is one of the most commonly used nickel-based superalloys due to its extraordinary inherent properties. Inconel 718 is a suitable material for ...
In-Vitro Degradation of Hollow Silica Reinforced Magnesium Syntactic Foams in Different Simulated Body Fluids for Biomedical Applications
(MDPI, 2020)
This article reports the mechanical and biocorrosion behaviour of hollow silica nanosphere (SiO₂) reinforced (0.5–2 vol.%) magnesium (Mg) syntactic foams. Room temperature tensile properties’ characterization suggests that ...
Cryogenic Drilling of AZ31 Magnesium Syntactic Foams
(MDPI, 2020)
Machined surface quality and integrity affect the corrosion performance of AZ31 magnesium composites. These novel materials are preferred for temporary orthopedic and vascular implants. In this paper, the drilling performance ...